home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 20
/
Cream of the Crop 20 (Terry Blount) (1996).iso
/
os2
/
ewarv30.zip
/
DOOR.CFG
< prev
next >
Wrap
Text File
|
1996-04-03
|
15KB
|
335 lines
; DOOR.CFG - Sample OpenDoors door configuration file
;
; This configuration file can be used by the sysop to customize an OpenDoors
; door for use on their own system. The information in this file is NOT usually
; needed, and the file can be left as is, or even erased, without effecting the
; door's performance. OpenDoors is designed to run on almost any BBS system
; automatically, without requiring anything but to the door's .EXE file.
; However, there are many cases where the sysop may wish to customize a door's
; operation using this configuration file. The configuration file system is
; provided to allow the customization of options such as paging hours, maximum
; time permitted within the door, etc., and to allow OpenDoors doors to be run
; under even the most non-typical BBS setups.
;
; Any text following a semi-colon (;), and blank lines, are ignored.
;
;------------------------------------------------------------------------------
;
; BBS system directory. Indicates where the door information file (drop file)
; can be found. Remove the semi-colon (;) to activate this option.
;
;BBSDir C:\BBS
;
;------------------------------------------------------------------------------
;
; The door's working directory. This is where the door's system files are
; located. Remove the semi-colon (;) to activate this option.
;
;DoorDir C:\BBS\MYDOOR
;
;------------------------------------------------------------------------------
;
; Local mode override. Forces door to always operate in local test mode.
; Remove the semi-colon (;) to activate this option. When this mode is
; activated, no door information file is required and default settings are
; used for the user's name, location, etc.
;
;LocalMode
;
;----------------------------------------------------------------------------
;
; Don't mess with this.
;
;
Personality Standard
;
;------------------------------------------------------------------------------
;
; Log File options. "LogFileName" specifies filename (path optional) where the
; door should record log information. To disable the log file altogether,
; remove the semi-colon (;) from the "DisableLogging" line.
;
;LogFileName DOOR.LOG
;DisableLogging
;
;------------------------------------------------------------------------------
;
; BBS node number that door is running on. Only used if OpenDoors is unable
; to determine the node number by some other means.
;
Node 1
;
;------------------------------------------------------------------------------
;
; Sysop paging hours. Sysop paging will be permitted beginning at the start
; time, up until, but not including, the end time. Times should be in 24-hour
; format. To disable paging on a particular day, set the paging start and end
; times to the same time. To make paging always available, set the start time
; to 0:00 and the end time to 23:59.
;
; Start Time End Time
SundayPagingHours 9:00 22:00
MondayPagingHours 8:30 22:00
TuesdayPagingHours 8:30 22:00
WednesdayPagingHours 8:30 22:00
ThursdayPagingHours 8:30 22:00
FridayPagingHours 8:30 22:00
SaturdayPagingHours 9:00 22:00
;
;------------------------------------------------------------------------------
;
; Duration of sysop page. Value indicates the number of beeps that compose the
; sysop page alarm, with one beep sounded per second.
;
PageDuration 10
;
;------------------------------------------------------------------------------
;
; Maximum length of time a user is permitted to access the door. If the user's
; total remaining time on the BBS is less than this value, the user will only
; be permitted to access the door for this shorter length of time. This option
; may be disabled by placing a semi-colon (;) at the beginning of the line.
; When this option is disabled, the user will be permitted to use the full
; of their remaining time on the BBS within the door.
;
;MaximumDoorTime 15
;
;------------------------------------------------------------------------------
;
; Inactivity timeout. Specifies the maximum number of seconds that may elapse
; without the user pressing any key, before the user will be automatically
; disconnected. A value of 0 disables inactivity timeouts.
;
InactivityTimeout 200
;
;------------------------------------------------------------------------------
;
; Name of the sysop. OpenDoors can usually determine the sysop's name from the
; information passed to the door by the BBS. However, some BBS software does
; not supply this information to doors. In such cases, if the sysop's name is
; required by the door, it may be supplied here. Remove the semi-colon (;) to
; activate this option.
;
;SysopName The Sysop
;
;------------------------------------------------------------------------------
;
; Name of the BBS. OpenDoors can usually determine the name of the BBS from
; the information passed to the door by the BBS. However, some BBS software
; does not supply this information to door programs. In such cases, if the
; name of the BBS is needed by the door, it may be supplied here. Remove the
; semi-colon (;) to activate this option.
;
;SystemName Unnamed BBS
;
;------------------------------------------------------------------------------
;
; Door colour options. These options specify the various text colours that
; will be used by the door if ANSI or AVATAR graphics modes are available.
; Colours are specified in the format:
;
; {Bright} {Flashing} [Foreground Colour] on [Background Colour]
;
; Where foreground and background colours are one of:
;
; Black
; Blue
; Green
; Cyan
; Red
; Magenta
; Yellow / Brown
; White / Grey
;
; Note that some of these options (such as those that pertain to files
; listings) are not used for all doors.
;
ChatUserColour Bright white on black
ChatSysopColour Bright red on black
FileListTitleColour Bright yellow on black
FileListNameColour Bright yellow on black
FileListSizeColour Bright magenta on black
FileListDescriptionColour Cyan on black
FileListOfflineColour Bright red on black
PagePromptColour Bright white on black
PopupMenuTitleColour Bright white on grey
PopupMenuBorderColour Black on grey
PopupMenuTextColour Black on grey
PopupMenuKeyColour Red on grey
PopupMenuHighlightColour Grey on black
PopupMenuHighKeyColour Red on black
;
;------------------------------------------------------------------------------
;
; Memory swapping options. These options are generally not needed, but can be
; used to customize OpenDoor's swapping behaviour. "SwappingDir" can be used
; to specify which directory or directories should be used for swapping.
; Multiple directory paths can be seperated using a semi-colon.
; "SwappingNoEMS" can be used to prevent any swapping from being done to EMS
; memory, and "SwappingDisable" can be used to disable memory swapping
; altogether. Remove the semi-colon (;) to activate any of these options.
;
;SwappingDir C:\
;SwappingNoEMS
;SwappingDisable
;
;------------------------------------------------------------------------------
;
; Serial port options. These options are generally not needed, as these
; settings can usually be determined from the BBS door information file.
; "LockedBPS" specifies the the BPS rate at which the door should communicate
; with the modem. "SerialPort" specifies the port port number that the modem
; is connected to. Unless you have reassigned the port numbers through your
; FOSSIL drive, port 0 corresponds to COM1, port 1 corresponds to COM2, and
; so on. Remove the semi-colon (;) to activate either of these options.
;
;LockedBPS 38400
;SerialPort 0
;
;
; Under DOS, a FOSSIL driver is normally used for serial I/O if one is
; available.